The Faris RDTA from Wotofo is a versatile device. It can be used as either an RDTA tank or an RDA. It can also be used with either a squonk mod or any mod with a standard 510 pin. The Wotofo Faris is an impressive device with remarkable build quality.
Here’s what you get when you buy the Wotofo Faris RDTA:
1 Wotofo Faris RDTA
1 User Manual
2 Wicking Port Blocks
1 Extra 810 Drip Tip
1 2mL Frosted PC Tank
1 0.33ohm Framed Staple Clapton Coil
1 Agleted Japanese Cotton
1 Extra O-Rings & Screws
The Wotofo Faris RDTA is made of 304 stainless steel and pyrex glass. The dimensions of the device vary depending on whether you set it up as an RDTA or an RDA. As an RDTA, the dimensions of the Faris is 44mm by 24mm. However, as an RDA, the dimensions are 36mm by 24mm. The Faris has a very stylish design. You will find a logo on the body of the device. The RDTA comes with an 810 Delrin drip tip as well as an 810 acrylic drip tip.
The design of the Wotofo Faris RDTA is pretty simple. The RDA section sits above the tank. To access the build deck, you need to remove the top cap. The device has a postless build deck with Philips screws on the side. You can use either single or double coil builds on the Faris. There are two large ports on the side to fit your wick. Also, the juice wells are pretty deep. The Wotofo Faris RDA comes with three framed staple coils as well as a bag of cotton, an Allen screw, a Philips screwdriver, and other accessories. The build deck on the Wotofo Faris is very spacious. Also, the fact that it is postless makes coil building easy. If you need extra coils, you can buy fused Clapton coils from the Wotofo online store.
You will notice that there are three holes on the side of the Wotofo Faris top cap. These are airflow holes, and they are angled downward, so when you take a puff, the air rushes down to your coil before going up to your mouth. This results in maximum flavor. The airflow holes are big enough, so you can use this device for direct lung hits. However, I prefer mouth-to-lung hits as the flavor is more intense when the airflow is a bit restricted.
The tank of the Wotofo Faris RDTA is located under the build deck. You can actually unscrew the build deck to access the tank. The device comes with two glass tubes for the tank section – the tank capacity varies depending on which of these tubes you use. With the standard clear glass, the tank capacity is 3ml. However, with the frosted glass, the tank capacity is 2ml. There is a side refill port on the side of the build deck that is covered by a silicone gasket. This means you do not have to dismantle the setup to refill your tank. Simply fix the tip of your bottle into the refill port and press to fill up the tank.
You will find a gold-plated 510 pin under the Wotofo Faris. The device also comes with a squonker pin so it can be used with a squonker mod.
To use the Wotofo Faris as an RDA, all you have to do is remove the tank tube and attach the bottom part that comes in the package.
You can get the Wotofo Faris RDTA at the Wotofo online store for only $24.99. This is a $5 discount on the original price of this product.